Expert Answers about Land Rover Range Rover Sport
- Does Fasica of 2014 Range Rover Sport Have to be Trimmed to Install Trailer Hitch
- To install the Draw Tite hitch part # 75229 on your 2014 Range Rover Sport you have to trim the rear fascia to allow the hitch to install properly. I attached a picture that shows how it will be trimmed. The lower fascia does not have to be removed when towing though.
view full answer... - Adding a 5-Way Trailer Connector to Hook Up to Boat Trailer
- You're correct that you need a 4-way to 5-way adapter, like part # 47515, to have the proper connection on your 2019 Land Rover Range Rover Sport to your boat trailer. The adapter plugs into the 4-way you've already installed and has the additional wire that needs to be spliced into the Rover's reverse light circuit using the included quick splice connector. I've linked a video of the install on a different vehicle just so you have the basic idea.
The tricky part is finidng the reverse...
view full answer... - How Does Rhino-Rack Roof Rack Install on a 2006 Land Rover Range Rover Sport
- Yes, the Rhino-Rack roof rack # RSPT508 will install in factory holes already on the roof of your 2006 Land Rover Range Rover Sport.
The plastic molding that runs down the tracks on either side of the roof is removed, and then trimmed. The roof rack tracks are installed into existing hardware, and the plastic roof molding will install around the tracks once it is trimmed. Purchase of the rack does indeed include the hardware you will need for installation.
This roof rack is going to...
view full answer... - Is Fascia Trimmed When Installing Trailer Hitch On 2016 Land Rover Range Rover Sport
- When installing the Draw-Tite Max-Frame Trailer Hitch, part # 75229 on your 2016 Range Rover Sport, the bottom underbody appearance panel needs to be trimmed. I have attached a photo from the installation instructions that shows where the trimming must be done.
No mention is made of the fascia being trimmed in the instructions.
view full answer... - Installation Instructions for Rhino-Rack RSP Roof Rack RSPT508 on 2011 Land Rover Range Rover Sport
- Both standard and alternate installation instructions for the Rhino-Rack RSP Roof Rack # RSPT508 are linked for your reference. This aero-style bar roof rack system is a confirmed fit for your 2011 Land Rover Range Rover Sport.
view full answer... - Factory Brake Controller Port Location on a 2010 Land Rover Range Rover Sport
- For some applications, it is located underneath and to the left of the steering column above the brake pedal. on others, it can be found beneath the dash, near the center console. It should be a gray colored plug that will have 6 pins/holes. There should only be 4 or 5 wires. I have included a link to the installation details for the wiring harness, # 3035-P for you.
view full answer... - Understanding Overrun Brake Towing Capacity of 2018 Land Rover Range Rover Sport
- Overrun brakes are brakes that use the inertia of the trailer against the vehicle braking to activate trailer brakes. For trailer brakes this is most commonly a style known as surge brakes that use hydraulic pressure. Installing a brake controller in your 2018 Range Rover Sport to operate trailer electric brakes would provide the same purpose. A really popular option is the Brake EVN # TK63VR which to install in your vehicle would only require the # 3035-P which plugs in under the dash.
view full answer... - Can the Ball Mount in the Curt Towing Starter Kit be Used in the Rise Position?
- Yes the ball mount included with the Curt Towing Starter Kit for 2" Hitches part # C45534 can be flipped over. You will need to remove the ball of course and place it on the other side. This should be torqued down to 250 ft/lbs. when installing it.
view full answer... - How to Install a Brake Controller on a 2007 Land Rover Range Rover Sport
- It sounds like your 2007 Land Rover Range Rover Sport came with the factory tow package which means you should be able to install the Tekonsha Voyager Trailer Brake Controller part # 39510 without cutting or splicing. In order to do this you will need to use the Tekonsha Plug-In Wiring Adapter part # 3035-P, not part # 3035-S. The plug that this harness will connect to should be located up under the dash near the emergency brake pedal or OBDII port.
Once you get the brake controller installed...
view full answer... - How To Install the Curt Echo On a 2015 Land Rover Range Rover Sport
- In order to use the Curt Echo Mobile Trailer Brake Controller part # C51180 on your 2015 Land Rover Range Rover Sport with a Curt T-Connector Vehicle Wiring Harness part # C56293, the Universal Installation Kit for Trailer Brake Controller part # ETBC7L is just what you need for this. In regards to installation, the only wires you must attach are the white ground wire and the black battery charge wire. The black battery charge wire is what powers the Curt Echo so you will need to run this...
view full answer... - How to Mount a 7-way Connector on the 2" Hitch on Your 2021 Range Rover Sport
- This is not an uncommon situation and we have a great solution for you. To mount a 7-way connector on the 2" hitch you have on your 2021 Land Rover Range Rover Sport you can use the Curt Easy Mount Bracket # C58000. This bracket wont require you to drill or modify anything, you just fit the bracket over your hitch receiver opening and secure around the lip with included hardware. I have included a picture that shows how this looks on a hitch.
view full answer... - Pin Out of Brake Controller Connector on 2021 Land Rover Range Rover Sport
- Other than some slight cosmetic changes, there haven't been any appreciable changes in the chassis of the Land Rover Range Rover Sport since the first model year of the 2nd generation in 2013. Tekonsha/Draw-Tite nor the rest of the companies have tested the pinout of the 2021 model, but there's no reason to believe it's been changed from the 2020 model. I've heard nothing that indicates the pinout of the 2021 is any different, but you can confirm this for yourself as described below.
The...
view full answer... - Why Don't Trailer Hitch Installs Require Loc-Tite
- Hitch hardware does not require Loc-Tite or any other thread lockers. Reason being the bolts are torque-to-yield bolts which means they stretch slightly as they tighten which works as a thread locker. This means that the hardware is one-time-use too.
view full answer... - Curt 4-Pole Wiring Harness C59236 Installation in 2011 Land Rover Range Rover Sport
- I suggest confirming that when you re-connect the tail light wiring plug in your 2011 Land Rover Range Rover Sport all lights operate properly. This would be the brake lights (when the pedal is pressed), the tail lights (when the vehicle headlights are turned on) and the turn signals when these are engaged. I suspect they will but it is helpful to confirm that all of the required signals are present at the lights before wiring in the trailer harness.
On your vehicle when the connector...
view full answer... - Will Installation of Trailer Hitch Receiver Void Warranty on 2019 Land Rover Range Rover Sport
- Installation of a hitch like the Curt # C13243 on your 2019 Land Rover Range Rover Sport will not void the warranty. It is not uncommon for a dealer to tell a customer that it will void the warranty. However, consumers are protected under the Magnuson–Moss Warranty Act. This allows aftermarket parts to be installed without warranty issues unless the installation or part caused a problem. The simple act of installing a hitch or other aftermarket part does not void the warranty.
view full answer... - Towing a 2013 Dutchmen Kodiak 241 RBSL on a 2008 Range Rover Sport HSE
- According to your specifications, your hitch will be able to pull your trailer.
However, there are some things to keep in mind.
First, the weight capacities of your vehicle and weight distribution bars must be taken into consideration as well. The lowest weight capacity out of all three of these (including your hitch) will be the maximum you can hook up. For your vehicle, check your owner's manual for its capacity. Check the weight capacity of your distribution bars' manual as well, paying...
view full answer... - Best Mounting Orientation of WAVT2-WHMAV2 2-Piece Polypropylene Trailer Vent
- If you mount the Redline 2-Piece Polypropylene Trailer Vent # WHMAV2-WAVT2 with the exterior part's flat slotted side facing forward (to increase air flow) there will definitely be a greater probability for rain and splashed water to enter the trailer. Still, as you noted from the customer-submitted photos we show on that item's page some have done this, and surely for the same reason.
If you happened to stay in dry/desert areas this will be less of a concern but since you are in the...
view full answer... - Solutions for Installing a Curt Hitch on a 2006 Range Rover Sport with a Full Sized Spare
- The best solution I can offer you is for you to acquire a smaller spare tire and use that in place of the full size spare so you can have the Curt Hitch # 13456 installed on your 2006 Land Rover Range Rover Sport.
Check out the installation instructions I attached for this product for you.
To complete your towing setup you may be interested in the following products:
etrailer.com Ball Mount Kit # EBMK4
Wiring Harness # C59496
view full answer...
Go To Results